Fully imported from Japan. MINI  EXCAVATORS

Click Here to display full size image
For all Sales enquiries, click here to e-mail your details. 

For all Parts & Accessory enquiries, click here to e-mail your details.

** Engine compliant with gas emission for
   EC Stage IIIA and EPA Tier4.
** Conform to the EC low noise regulation
** Swing parking brake equipped as standard
** Accumulator is installed to depressurise
   auxiliary line and lower attachments in
   emergency
** Front space extended (10% wider than N2)
** Achieves largest operation space in its class.
** Joystick lever control enables precision
    operation
** Travel speed selector switch in 2 locations
** Large dozer blade makes bulldozing easier
** The radiator and oil cooler are made of 
    aluminium and are corrosion resistant.
** Segmented boom cylinder hoses for easier
   replacement
** Full-opening engine cover for easy
   maintenance
** Sintering metal bush extends greasing interval
** Radiator protective net is standard
** The engine cover and the side cover are
    rugged pressed steel.
** Bucket cylinder hoses are placed inside arm
** Embedded boom lamp to prevent damage
** Cast iron large side guard and counterweight
** Arm link pin fixed by castle nut

35N3 Specifications
*Performance   Options
Bucket capacity 0.11m3  

* Long Arm (standard + 300mm)
bucket width 600mm   * Auxiliary hydraulic piping (63.1L/min 
Operating weight cabin (4 post) 3460kg (3325kg)   * ROPS cabin
Transportation weight Cabin (4p) 3385kg (3250kg)   * Steel shoe (300mm)
Swing speed 10min-1   * ROPS canopy
Travel speed

2.8/4.8km/h

   * Rubber padded crawler
Gradeability 58% (30o)   * Headlight 
Ground pressure 31kPa   * Fabric seat
Max. bucket digging force 26.5kN   * 2nd auxiliary hydraulic piping (24.6L/min)
*Engine   Buckets
Model YANMAR 3TNV88   0.055m3 / Digging bucket (400mm width)
Rated output 19.9kW(27.1PS)/2300min-1   0.12m3 / Digging bucket (660mm width)
Fuel tank capacity 49L   0.08m3 / Long arm bucket (500mm width)
*Boom swing system    
Type Boom offset with hydraulic cylinder    
Swing angle (L/R) 50o / 90o    
*Hydraulic system    
Pressure 20.6MPa    
Pump hydraulic flow 40.3L/min x 2 + 24.6L/min    
*Dozer blade    
Size 1550mm x 365mm    
Lift above/drop below ground 390mm / 450mm    


Download 35N brochure here (2.3Mb)